Anti-fall harness and work positioning in suspension

Features:
• Full Body Harness Should be Used as a Component in Personal Fall Arrest, Rope Access, Restraint, Work Positioning, Climbing, Control Descent and Rescue
• Back and Chest D–Rings for Fast, Easy and Safe Connection to the Other Elements of a Personal Fall Arrest System
• Incorporated Chest Ascender Provides an Easy and Secure Attachment Point and Makes Climbing Up the Rope Smoother and More Effective
• 2 x waist D-Rings for Work Positioning
• 1 x D-ring in Abdominal Area for Working in Suspension
• Suspension Trauma Straps
• Maximum comfort by virtue of Breathing, Antibacterial, Ergonomic Back, Waist, Leg and Shoulder Pads
• Special design Aluminum D rings
• Stainless steel AB-45 Automatic Leg Buckles For Fast Connection and Release
• UV Resistant High Strength Bonded Type Yarns and Contrastive Color Sewing for Quick Eye Control
• 4 x Gear Loops

Standard: EN 361, EN 358, EN 813, EN 12277, EN 1497

Technical Data Sheet:

O conteúdo Anti-fall harness and work positioning in suspension Power Access aparece primeiro em Onwork.

Sentinel bridge system.

Features:
SENTOR has multifunctional, modular and innovative design. The system is based on simplicity, lightness and robustness as theprinciple of development.
ÉIt is very easy to adapt to different workspaces (such as Rescue, Rope Access, Manhole, Silos etc.)
SENTOR can be constructed into many different configurations including;
Monopod, Twinpod, Tripé, Quadripod, Quadripod Bridge System
Tested and certified for the use of 2 people and 300 kg working and rescue load.
The system has a main head with unique design made from high-alloy aluminum material. Four legs can be attached and detacheddepending on the type of slots on this head.
The telescopic legs can easily be attached to the head with the help of a pin to achieve the desired structure.
Telescopic legs have anchor points in their heads. Thanks to these anchoring points, the system can be fixed at different points withthe help of rope.

Standard: EN 795:2012 Type B & CEN TS 16415:2013 Type B

Technical Data Sheet:

O conteúdo Sentor – bridge system aparece primeiro em Onwork.

Mobile set TECHNO ARM.

Features:
Designed to be used as fall arrest and rescue system when working in manholes, platforms, silos, roof edges etc.
Made of aluminum alloy material. It is light weight. Transportation and installation can be performed by one person.
It has 360-degree rotatable console body. Can be fixed when requested. The console posts have two different sizes (60 and 130 cm) for different working heights.
The cantilever can be adjusted in eight different positions in accordance with the required angle, position and height. Switching inpositions is easily accomplished by changing the pin position.
It has more than one ground sleeve for different working areas.
Retractable Fall Arrester with Recovery Arm and / or Hand Winch can be mounted on anchorage body.

Standard: EN 795:2012 Type B

O conteúdo System Techno Arm 1300 aparece primeiro em Onwork.

Mobile truck loading platform.

Features:
GIRAF has an innovative design.
The anchor point can be created at any place where truck is parked.
Truck Loading / Unloading is now safer with the GIRAF 360.
Thanks to its 360-degree rotation feature, it can be used in two vehicles parked side by side. Working space can be delimited by 180 or 30-degree intervals.
No balance weight is required for installation.
Has active shock absorber system.
Has a telescopic body and can be installed quickly by means of a forklift which can be raised by at least 3 m.
Max Height is 7.1 meters.
Can be used with more than one type of leg depending on working area.
For 1 person use.

Standard: EN 795:2012 Type B

Technical Data Sheet:

O conteúdo Mobile truck loading platform. GIRAF 360 aparece primeiro em Onwork.

Load winch.

Features:
Wire Rope Dia: 7 mm
Length: 20 meters
Safe Working Load(SWL): 250 kg
Weight: 7 kg
Note: This device is loadwinch and so must not beused as personal protectiveequipment.

Technical Data Sheet:

O conteúdo Load winch ALKO 901 (20mt) aparece primeiro em Onwork.

Confined space rescue system.

Features:
High functional stability, load-carrying capacity max. 2 persons
Equipped with foldable rubber feet for high stability in various substrates
Light aluminum construction
Adjustable legs with integral push pins
Corrosion-resistant coating
300 kg loading capacity

Standard: EN 795- Type B

Technical Data Sheet:

O conteúdo Tripod Rock (2,5mt) aparece primeiro em Onwork.

Retractable fall arrester.

Features:
Low-maintenance height-safety device with galvanized steel wire rope
Plastic housing
The snap hook with a fall indicator

Standard: EN 360, CNB 11.060 2008 Sharp Edge Type A

Technical Data Sheet:

O conteúdo Retractable fall arrester. HPS-6 aparece primeiro em Onwork.

Retractable fall arrester.

Features:
This aluminium block, housed in aluminium, is a robust, low maintenance device, equipped with a steel cable, finished with a double action steel hook.
The anchor point of attachment on the fall arrest block is an open steel cable, suitable for connection via a standard carabiner connector, or a standard carabiner connector with an anchor sling, or a large carabiner.
The fall arrest block was tested in a simulated fall over an edge

Standard: EN 360, CNB 11.060 2008 Sharp Edge Type A

O conteúdo Retractable fall arrester. IKAR H-18 aparece primeiro em Onwork.

Retractable fall prevention device with recovery mechanism.

Features:
This aluminium block, housed in aluminium, is a robust, low maintenance device, equipped with a steel cable, finished with a double action steel hook.
The attachment point on the fall arrest block is an open steel cable, suitable for connection via a standard carabiner connector, or a standard carabiner connector with an anchor age sling, or a large carabiner.
This fall arrest block also has a built-in recovery mechanism, which is operated by pulling a pin on the side of the block and attaching a coiled handle. This then allows the device to be used to lift or lower a fall pole, or if it has become disabled in a confined space.
The fall arrest block was tested in a simulated fall over an edge

Standard: EN 360, EN 1496

Technical Data Sheet:

O conteúdo Retractable fall prevention device with recovery mechanism. HRA-18 aparece primeiro em Onwork.

Retractable fall prevention device with automatic lowering.

Features:
This device works with a permanent descender brake, thus eliminating any possibilities of a crash in the system
The descender process is carried out with a speed of approx. 1.0 m/s with the centrifugal force safely regulated downward.
A freewheel enables a non-braked retraction of the fastener
The digital counter measures the rotations of the rope drum and indicates the permissible, completed work (10,000m) of the device at a corresponding counter reading

Standard: EN 341

O conteúdo Retractable fall prevention device with automatic lowering. ABS 5 D aparece primeiro em Onwork.