Retractable fall arrester.

Features:
Low-maintenance height-safety device with galvanized steel wire rope
Plastic housing
The snap hook with a fall indicator

Standard: EN 360, CNB 11.060 2008 Sharp Edge Type A

Technical Data Sheet:

O conteúdo Retractable fall arrester. HPS-6 aparece primeiro em Onwork.

Retractable fall arrester.

Features:
This aluminium block, housed in aluminium, is a robust, low maintenance device, equipped with a steel cable, finished with a double action steel hook.
The anchor point of attachment on the fall arrest block is an open steel cable, suitable for connection via a standard carabiner connector, or a standard carabiner connector with an anchor sling, or a large carabiner.
The fall arrest block was tested in a simulated fall over an edge

Standard: EN 360, CNB 11.060 2008 Sharp Edge Type A

O conteúdo Retractable fall arrester. IKAR H-18 aparece primeiro em Onwork.

Retractable fall prevention device with recovery mechanism.

Features:
This aluminium block, housed in aluminium, is a robust, low maintenance device, equipped with a steel cable, finished with a double action steel hook.
The attachment point on the fall arrest block is an open steel cable, suitable for connection via a standard carabiner connector, or a standard carabiner connector with an anchor age sling, or a large carabiner.
This fall arrest block also has a built-in recovery mechanism, which is operated by pulling a pin on the side of the block and attaching a coiled handle. This then allows the device to be used to lift or lower a fall pole, or if it has become disabled in a confined space.
The fall arrest block was tested in a simulated fall over an edge

Standard: EN 360, EN 1496

Technical Data Sheet:

O conteúdo Retractable fall prevention device with recovery mechanism. HRA-18 aparece primeiro em Onwork.

Retractable fall prevention device with automatic lowering.

Features:
This device works with a permanent descender brake, thus eliminating any possibilities of a crash in the system
The descender process is carried out with a speed of approx. 1.0 m/s with the centrifugal force safely regulated downward.
A freewheel enables a non-braked retraction of the fastener
The digital counter measures the rotations of the rope drum and indicates the permissible, completed work (10,000m) of the device at a corresponding counter reading

Standard: EN 341

O conteúdo Retractable fall prevention device with automatic lowering. ABS 5 D aparece primeiro em Onwork.

Retractable webbing fall .

Features:
Can also be used as shock absorbing webbing lanyard
Locks automatically to prevent a fall

Standard: EN 360

O conteúdo Retractable webbing fall – 2,5m aparece primeiro em Onwork.

Retractable Fall Block.

Features:
Incorporated with 4,7 mm high tenacity galvanized wire rope.
Gives greater working distances from the anchorage point.
Incorporates self-locking function and automatic tensioning system.
Retractable wire rope system.
High strength PE housing.
Anchorage eye with swivel action prevents undue twist of rope while working or on the event of a fall.

Standard: EN 360

O conteúdo Retractable Fall Block – 3.3m aparece primeiro em Onwork.