Mobile anchor.

Features:
360° rotatable telescopic mobile anchor with a capacity of 3 users
Allows for creating horizontal lifeline
Ease of handling and installation thanks to steel fixed legs and aluminum body
Handling arm integrated into body
Allows for installation up to an angle of 15°
Steel base plate can be used also an anchor point

Strength: 36kN (Base Plate), 17kN(Body)
Weight: 7,5 kg (Base Plate), 12,5 kg (Body)
Material: Aço (Base Plate), Alumínio (Body)
Number of Users: 3
Min. Height: 106 cm
Max. Height: 137 cm

Standard: EN 795 Type A, CEN/TS 16415 Type A

Technical data sheet:

O conteúdo Mobile anchor TUMBLER aparece primeiro em Onwork.

Wall anchor.

Features:
Designed for creating safe connecting point where it is difficult to find anchor point on the wall, pillar and joist
Rust resistant
Doesn’t cause any visual pollution at living areas
Consist of male & female parts only
Made of 316 grade stainless steel material

Standard: EN 795/A:2015

Technical data sheet:

O conteúdo Wall anchor. W-01 aparece primeiro em Onwork.

Permanent anchor point.

Features:
Material: Stainless steel
Diameter: 12 mm
Strength: 25 kN
Weight: 95 gr

Standard: EN 795 Tipo A, EN 959

Technical data sheet:

O conteúdo Permanent anchor point – complete set aparece primeiro em Onwork.

Tubular anchorage.

Features:
Used to create safe anchoring point for working at height
25 mm polyester tubular webbing
UV and dust resistant bonded type high tenacity sewing thread (different color than webbing)

Standard: EN 795 Type B, EN 566

Technical data sheet:

O conteúdo Tubular anchorage sling aparece primeiro em Onwork.

Anchorage strap.

Features:
Used to create safe anchoring point for working at height
50 mm width and 3 mm thick polyester webbing
2 x S304 quality stainless steel D rings
UV and dust resistant bonded type high tenacity sewing thread (different color than webbing)

Standard: EN 795 Type B, EN 566

Technical data sheet:

O conteúdo Anchorage strap F-7 aparece primeiro em Onwork.

Steel anchor rope.

Features:
Used to create safe anchoring point for working at height
PVC coated stainless steel wire rope of dia 8 mm.
The PVC coating prevents exposure to dirt and chemicals, hence increases corrosion resistance of the lanyard.

Standard: EN 795 Type B, EN 354

Technical data sheet:

O conteúdo Steel anchor rope aparece primeiro em Onwork.

Door anchorage.

Features:
Designed to fit door or window sizes from 60 cm to 130 cm in width.
This equipment is designed for use by 2 persons.
There is no drilling or welding required.
Portable and lightweight high alloyed aluminium body.
Prevents any damage to the structure with rubber stands.
Can be easily moved from one location to another, installed, removed and stored.

Standard: EN 795 Type B, CEN/TS 16415 Type B

Technical data sheet:

O conteúdo Door anchorage aparece primeiro em Onwork.

I-beam slider.

Features:
Designed for creating easy and safe connecting point by skidding through joists.
Light weight due to Aluminium housing.
Easy to setup. Does not require surface change on joist.
With swivel D Ring.

Standard: EN 795/B:2012, ANSI Z359.1-2007, ANSI Z359.1-2011, OSHA 1926.502

Technical data sheet:

O conteúdo I-beam slider. CT110 aparece primeiro em Onwork.

Fixed beam anchorage.

Features:
Designed to clamp onto a horizontal I-Beam, to create a fixedanchor point.
Can easily adjusted to firmly grip beams from 101-355 mm.
The device is initially incrementally adjusted to fit the approximate size of the Beam, with final adjustment using the tightening Nut, which is fitted with a flip-out lever.
The Beam has visual indicating features, allowing the userto easily identify when the device is loose, tightened orover-tightened.
The lock button provides protection to prevent accidentalopening/loosening, during use.
The CT113 is fitted with a Swivel D Ring and is suitable for use in vertical and horizontal mounting.
Number of Users: 1 max.

Standard: ANSI Z359.1-2007, ANSIZ359.7-2001,OSHA 1926.502,OSHA 1910.66

Technical data sheet:

O conteúdo Fixed vertical beam anchorage point aparece primeiro em Onwork.

BEAM TROLLEY.

Features:
Beam Trolley is a mobile anchor point, for use onstructural beams.
Fitted with toggle plates, which allow for simple adjustment of the rollers when installing/uninstallingthe device.
Ideal for use as an anchor connection for fall arrestsystems (not suitable for material handling).
No surface alteration (i.e drilling) is required on order touse the Beam Trolley.
Fitted with a swivel D ring.
Light weight due to Aluminium housing.

Standard: EN 795/B:2012, OSHA 1910.66, ANSI Z359.1-2007

Technical data sheet:

O conteúdo Anchoring point with horizontal slide control aparece primeiro em Onwork.